Precast Magnet,Magnetic Sheet Separator,Magnetic Chucks

Tags :

Utility anchors are designed for reinforced or unreinforced concrete units, especially for decking, pipes, and culverts; or any application where a construction site can benefit from an approved and tested precast concrete lifting anchor, a multipurpose anchor for lifting and tilting precast concrete. No particular lifting shackles are required as they allow the direct connection of the crane hook to the prefabricated unit. These anchors can be used in axial and shear applications without additional reinforcement.

view detail

Utility Anchor Recess Former

Tags :

Utility Anchor Recess Former are essential for the safe and efficient handling of precast concrete elements. They help to ensure that the lifting anchors are properly positioned and secured, which reduces the risk of accidents during lifting and transportation. We offer a number of high-quality recess formers for use with our utility, erection, general purpose and dog bone anchors and recess former accessory holding plates and stud plates with wing nuts for erection anchors and dog bones.

view detail

Releasing Tool for Shuttering Magnet

Tags :

Releasing Tool for Shuttering Magnet - It is used as a either to force apart handle which magnet been welded Concrete Magnet crowbars are commonly used to remove magnet from the iron steel surface, or pry apart magnet and let the magnet return to the steel box. A concrete magnet crowbar, or magnet pry bar,is a tool for removing the concrete magnet box, the concrete magnet crowbar is made of carbon steel which is a strong and tough. This concrete magnet bar has a half circular notch on the prybar which could match with the concrete magnet handle. After catching the concrete magnet handle, someone could push the steel bar which could pry up the Block Magnet in the magnet box.

view detail

Automatic Rebar Tying Tool

Tags :

The automatic steel bar tying machine is an intelligent device that can quickly complete steel bar tying through motor drive or semi-automatic operation. Its core principle is to use a mechanical arm or rotating claw to accurately grab the binding wire and complete the knot around the intersection of the steel bars, replacing the traditional manual operation. This type of tool is suitable for tying steel bars with a diameter of 8-34mm and can be widely used in residential buildings, bridges, tunnels and other scenes.

view detail

Rebar Spacer Wheels For Precast Concrete

Tags :

Rebar Spacer Wheels are a type of plastic support designed for precast concrete that is used to fix the position of the rebar and maintain the distance between it and the formwork. Its core function is to ensure uniform thickness of the concrete cover after pouring and avoid the risk of corrosion caused by exposed or insufficiently covered rebar15. This type of product is usually made of high-strength plastic (such as PA, HDPE), which has corrosion resistance, high temperature resistance and aging resistance, and is suitable for vertical walls, horizontal floors and complex structures.

view detail

Wire Rope Lifting Loop

Tags :

Wire Rope Lifting Loop For Precast Concrete Elements is a lifting tool for precast concrete elements, widely used in the construction and precast industries during transportation and installation. Made of high-strength steel wire rope, usually galvanized for corrosion resistance and durability. The wire rope is fixed by a steel crimping sleeve to ensure a secure connection. A wide range of load capacities, from 0.5 tons to 12.5 tons. Different models of lifting loops are suitable for precast concrete elements of different weights.

view detail

Lifting Sockets

Tags :

The Threaded Socket System is available in a wide variety of specially designed sockets to suit all types of different applications. It also offers a wide range of lifting capacities from 500kg up to 12500kg. Our sockets are supplied in standard BZP, or a stainless steel finish on request.

view detail

Wire Rope Lifting Loop For Precast Concrete Elements

Tags :

Wire Rope Lifting Loops are a cost effective method of lifting most types of pre-cast concrete units suitable for all types of threaded lifting inserts. Our wire rope threaded lifting loops are manufactured from high specification wire swaged onto a steel ferrule, providing a strong and reliable lifting device that can be re-used, subject to being checked for damage prior to each lift All loops are clearly marked with the manufactures details, the SWL and an individual serial number to comply with regulations . Supplied from stock in both M and Rd thread types from M12 to Rd52.

view detail

Magnetic Urethane Chamfer

Tags :

Magnetic Urethane Chamfer are one of the most versatile accessories in the precast concrete industry. They can handle extreme working conditions. They are designed to create beveled edges in the corners of concrete siding, as well as some formwork. Two types of polyurethane durometers are commonly used: 60 Shore hardness and 90 Shore hardness. They come in several different sizes and can be fully customized to meet the specific requirements of the manufacturer.

view detail

Fixing Socket With Cross Pin

Tags :

Fixing Socket With Cross Pin is a connection device used for the installation of precast concrete components. It fixes the precast components in the concrete structure through cross pins, without the need for additional reinforcement, and can quickly and reliably connect the precast components.

view detail

Rotary iron remover

Tags :

Magnetic Rotary Separator consists of a cyclic magnetic bar group and housing outside. A motor is necessary to drive the magnetic rods rotating. Magnetic Rotary Separator is used to remove the ferrous contaminants from the material that is apt to caking and bridging. These materials, like power with high moisture which is certain viscous, are easy to cake using fixed magnetic separators. However, the rotary action will scatter the material and make more contaminants attracted to the rods. This unit embodies unapproachable capacity compared to other fixed separators.

view detail

Wavy Tail Anchor(Long Type)

Tags :

Wavy Tail Anchor (Long Type) is a mechanical anchor designed for precast concrete components. Its tail adopts a unique wavy structure, which can greatly improve the bonding strength and pull-out resistance with concrete. This product is widely used in prefabricated buildings, bridges, tunnels and other projects to ensure a stable connection between components and enhance the safety and durability of the overall structure. The socket of the Wavy Tail is available in high grade zinc plated carbon steel and is swaged to a waved reinforcment bar. They are available with Rd12 to Rd52 threads that have load ratings from 500kg to 12,500kg. Stainless Steel sockets and re-bar tails are available to special order.

view detail

Products

Precast Concrete Formwork

Magnetic Separators

Magnetic Chuck

Magnetic Lifter

Fishing Magnet